Sekey Home 3002 Manual De Instrucciones página 9

1. Make sure to unplug the power cord when not in use to reduce the risk of
fire, electric shock or injury. Avoid the power cord from being squeezed or
scratched by sharp objects. And make sure to store or secure the power cord
correctly to avoid being tripped.
2. The construction and electrical outlet wiring must comply with local building
codes and other applicable regulations to reduce the risk of fire, electric shock
and injury to people.
3. Do not wire the outlets or circuits on your own. To reduce the risk of fire,
electric shock or injury, always ask a licensed electrician to make the
installation
1. Please confirm the power is off when you start the installation.
2. Connect the unit to the power source, the power should be no less than
10Amp/230V AC. If the power cord is not long enough, you can use an
extension cord with a power of not less than 2000W.
Note：
When placing the fireplace or building the wall structure, please place the core in
dry, safe and clean places.
1. If there is no satisfactory socket near the selected position, please ask a
professional electrician to install the socket behind or near the frame as
requirements.
WARNING
INSTALLATION
6