Rules Of Use - Steinberg Systems SBS-AHB-65 Manual De Instrucciones

e) When transporting or moving the unit from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the unit is used.
f) Clean the unit regularly to prevent permanent dirt build-up.
g) Use air to power the unit, no other gases are allowed.
h) Use reinforced hoses for the compressed air connection in areas with a high
risk of mechanical damage.
i) Before each use, make sure that the nozzle is properly mounted in the machine
and that the hose is properly attached and undamaged.
j) The air supplied to the machine should be dehumidified, clean, and free of
contaminants. Contaminants can clog hoses and cause damage to the machine
and its components.
k) If you notice any leakage from the unit or hoses, immediately disconnect the
compressed air supply and correct the fault.
l) Do not exceed the recommended supply pressure as this may damage the unit.
m) Do not tamper with the unit to alter its performance or design.
n) Keep the unit away from sources of fire and heat.
o) Do not overload the unit.
p) Caution: the unit is not suitable for lifting or transporting loads!
q) Do not crush or twist the air hose.
r) When dismounting the balancer, first dismount the device or unit that is
suspended from it.
CAUTION! Although the product has been designed to be safe, with
adequate safeguards, and despite the additional safety features
provided to the user, there is still a slight risk of accident or injury
when handling the unit. You are advised to use caution and common
sense when using this product.

2. Rules of use

The product is designed to help organize the ergonomics of working with
pneumatic tools, keeping it at a given height within the reach of the workstation.
The user is responsible for any damage resulting from misuse.