Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5
Operation
5.1 Startup
These operating instructions must be brought to the attention of all persons entrusted with the operation of the
machine, with particular emphasis on the chapter "Safety instructions".
5.2 Switching on
Prior to switching on the machine, ensure that the planing shaft does not rest on the
support or the workpiece.
Prior to switching on the machine, hold it with both hands at the handles provided.
Use the following procedure to switch on the
machine:
1.
Press the locking lever (3) forward to unlock
the switch-on lock.
2.
With the locking lever (3) pressed, actuate and
hold the operating lever (4).
3.
Release the locking lever (3).
The machine is switched on
✓
Since the switch is not latching, the machine runs only as long as the operating lever is
pressed.
5.3 Switching off
Use the following procedure to switch off the
machine:
1.
Release the operating lever (4).
➢
The integrated automatic brake limits the
coasting time of the planing shaft to
approx. 1-3 seconds.
The switch-on lock is activated
➢
automatically and secures the machine
against being switched on inadvertently.
✓
The machine is switched off.
16
Fig. 10: Switching the machine on
Fig. 11: Switching the machine off
ZH320 Ec
11/2021
Publicidad
Tabla de contenido
