Safety; Intended Use Of The Machine; Technical Restrictions; Prohibited Use / Forseeable Misuse - HOLZMANN MASCHINEN GBM25 Manual De Instrucciones

SAFETY

This section contains information and important notices for safe commissioning and handling of
machine.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and
prevent misunderstandings as well as possible damage to property and persons. Also
observe the symbols and pictograms used as well as the safety instructions and
hazard warnings!

12.1 Intended Use of the Machine

The machine is intended exclusively for the following activities:
The production of holes/threads in cold metal or other materials that are not hazardous or non-
combustible with approporate tools.
HOLZMANN MASCHINEN
beyond this and for any resulting damage to property or injury.
12.1.1

Technical Restrictions

The machine is intended for use under the following ambient conditions:
Relative humidity:
Temperature (for operation)
Temperature (for storage and/or transport)

12.1.2 Prohibited Use / Forseeable Misuse

- Operation of the machine without adequate physical and mental aptitude
- Operating the machine without knowledge of the operating instructions
- Changes in the design of the machine
- Operating the machine under explosive conditions
- Operating the machine outside the specified power range
- Remove the safety markings attached to the machine.
- Modify, circumvent or disable the safety devices of the machine.
The prohibited/hazardous use or disregard of the information and instructions presented in
this manual will result in the voiding of all warranty and damage claims against Holzmann
Maschinen GmbH.

12.2 User Qualification

Prerequisite for the use / operation of the machine is a corresponding physical and mental
aptitude as well as knowledge and understanding of the instruction Manual.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified
electrician or carried out under the guidance and supervision of a qualified Electrician.

12.3 Safety Devices

The machine is equipped with following safety devices:
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
assumes no responsibility or warranty for any other use or use
max. 65 %
+5° C bis +40° C
-20° C bis +55° C
SAFETY
21
GBM25; GMB25T