Safety Instructions - BoomToneDJ BEE-FX LZR Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5- Safety instructions

Before using your equipment, we recommend that you read all the
instructions in this manual.
WARNING
ATTENTION:
CLASS 3R LASER DEVICE
EXPOSURE TO THE HAZARDOUS BEAM
LASER RADIATION
Visible and invisible LASER radiation. Avoid direct or indirect exposure to
eyes or skin! LASER Class III R EN60825-1: 2014in accordance with the
following European Directives:
LVD Directive n°2006/95/EC
RoHS 2 Directive n°2011/65/EU
EMC Directive n°2014/30/EU
Keep this manual for future reference. If you resell this unit, be sure to pass this
manual on to the new owner.
Unpack the entire unit and all accessories. Check that there is no damage and that the
unit is in perfect condition.
It is important to use the supplied power cable (grounded cable).
Always unplug the unit before servicing.
Maximum ambient temperature for optimal operation of the device: 40°C. Do not use
the device if the ambient temperature exceeds this value.
If there is a problem with the unit, turn it off immediately. Do not attempt to repair it
yourself. Contact your dealer or an authorized service center. There are no user-
replaceable parts except for the fuse.
Do not connect this device to a variable power pack such as a "Dimmer pack".
To reduce and avoid the risk of electric shock or fire, do not use this product in a wet
or humid environment.
Do not look directly at the light beam. Light from a LASER can cause permanent damage
to the eyes.
This unit must be installed with a strong hook of adequate size for the weight carried.
The device must be screwed to the hook and tightened properly to prevent it from
falling due to vibrations produced by the machine during operation. The hook must
27

Publicidad

Tabla de contenido
loading

Tabla de contenido