General Information; Symbols; Generality - Pentax IPFC 109 Manual De Instrucciones

1. General information

1.1. Symbols

ATTENTION

1.2. Generality

Symbol indicating the instructions of the manual relating to safety. The non-
compliance with these instructions exposes to health risks.
Symbol indicating the instructions of the manual relating to electrical safety. The non-
compliance with these instructions exposes to electrical risks.
Wording indicating the main warnings for correct system installation, functioning and
management. However, for a correct use of the system for its entire life-span, all
instructions and indications supplied in this manual must be complied with.
Check that the material received corresponds to that in the transport document and
that it is not damaged.
To work safely and obtain the best results, before starting the system remember to
read all the instructions contained in this manual and in the attached documentation.
The manual and the attached documentation constitute integrating part of the system
and must be kept with care and be consulted by those in charge of use and
maintenance of the system.
No part of this documentation can be reproduced without the written authorisation by
the manufacturer.
Given the quick technical progress, the not strictly standard production and the
company continuous improvement policy, the units may be subject to amendments by
the manufacturer without prior notice.
The non compliance with all indications supplied in this manual, an improper use of or
unauthorised amendments made to the system void any form of responsibility by the
manufacturer for eventual damages to persons, animals or things.
4