smartmi VortexWave Manual De Usuario página 14

Installation
Installing the charging base
Place the charging base against
1
the wall on a flat surface, insert the
adapter plug into a compliant outlet,
and turn on the power supply. Place
any excess wires in the cable winding
trough.
Insert the self-cleaning tray from top
2
to bottom and fix it on the charging
base.
Make sure that there are no
3
obstacles within 1.5 meters in front of
the charging base and 0.5 meter on
both sides.
Tips:
After the charging base is connected to the power
supply, its indicator will always be on.
Self-cleaning trays must be used for wooden floors
or other especially absorbent surfaces.
Warning: To avoid soiling carpet or affecting the
recharging of the robot, installing the charging base
on a carpet is strictly prohibited.
09