Batteries And Charging - smartmi VortexWave Manual De Usuario

If you do not intend to use it for an extended period of time, be sure to clean the
water tank and leave the cover open when putting it away.
To avoid damaging the robot, do not add hot water to the water tank.
Check that the flip cover has been closed before operating the robot.
Do not use the robot around an open flame or fragile items.
Do not use the robot on a surface with water that exceeds the capacity of the
water tank.
Do not use the robot in a room with a sleeping infant.

Batteries and Charging

Do not burn the robot even if it has been seriously damaged as it may cause the
battery to explode.
Do not use any third-party batteries, power adapters, or charging bases.
Do not disassemble, repair, or modify the battery or charging base without
permission.
Do not place the charging base close to heat sources (e.g., radiators).
Do not wipe or clean the robot or the charging base electrode pads with a wet
cloth or wet hand.
Be sure to dispose of the battery in the proper method. Protect the environment
by disconnecting the power supply and taking the battery out of the robot before
discarding it.
In the event the adapter power cord is damaged, for your own safety ensure that
it is replaced by professionals from the manufacturer, its repair department, or a
similar department.
Make sure that the robot has been powered off and packed in the original box, if
possible, before transporting it.
Do not pour water into the robot or immerse it in water.
If you are not going to use the robot for an extended period of time, fully charge it
before turning it off and store it in a cool, dry place. Charge it at least once every 3
months to avoid damage to the battery due to over-discharge.
04