Charging The Robot - smartmi VortexWave Manual De Usuario

Charging the robot

Place the robot on a flat surface indoors as shown in the
1
figure.
Tips:
Fully charge the robot before starting cleaning.
Before starting cleaning, tidy up any wires or objects on the ground to avoid
causing damage by entanglement, dragging, or collision during the cleaning
process.
Long press to start the robot and then short press
2
the robot to automatically return to the charging base for
recharging. After the robot is fully charged, it will go into
standby.
It is recommended that cleaning start from the charging base.
When the battery is low during cleaning, the robot will automatically return to
the charging base. Once the battery has fully charged, it will automatically
resume the unfinished cleaning.
11
for