KALLISTA P21651 Instrucciones De Instalación página 3

INSTALLATION INSTRUCTIONS
‰ Apply sealant tape to one end of a 1/2" NPT nipple.
‰ Install the nipple to extend 11/16" (17 mm) beyond the finished wall.
‰ Ensure the gap between the nipple and finished wall is no more than 3/8" (10 mm).
‰ Apply sealant tape to the exposed threads of the nipple.
‰ Thread the wall bracket onto the nipple.
‰ Using a clean strap wrench, tighten the bracket flush to the wall with the outlet oriented down.
‰ Apply a bead of clear sealant around the perimeter of the bracket.
‰ Turn on the water and allow water to flow through the bracket to flush out debris.
‰ Check connection for leaks. Repair as needed.
1491052-2-A
3 of 8
1. INSTALL THE PIPE NIPPLE
2. INSTALL THE WALL BRACKET
Wall Bracket with
Integrated Supply Elbow
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.