Accessories Supplied With The Unit; Before Installation - EAS ELECTRIC EMCH Serie Manual De Instrucciones

3 ACCESSORIES

3.1 Accessories supplied with the unit

Installation Fittings
Name
Installation and
owner's manual(this
book)
Technical data manual
Y-shape filter
Wired controller
wirings
Drian hose
Energy label
Network
matching wires
Protect Angle
3.2 Accessories avaliable from supplier
Thermistor for buffer tank temp.(Tbt)
Connection wiring of Tbt sensor
Thermistor for Zone 2 flow temp.(Tw2)
Thermistor for Tbt,Tw2 can be shared. If necessary,
you can purchase other thermistors and connection
wiring from the supplier.
The position of barycenter for different units can be seen in the picture below.
A
C
Quantity
Shape
1
1
1
1
1
1
1
1

4 BEFORE INSTALLATION

Before installation
Be sure to confirm the model name and the serial
number of the unit.
Transport
Due to relatively large dimensions and heavy weight,
the unit should only be hoised by lifting tools with
slings, please refer to the following picture.
Protect Angle
 To avoid injury, do not touch the air inlet or
aluminum fins of the unit.
 Do not use the grips in the fan grills to avoid
damage.
 The unit is top heavy! Prevent the unit from falling
due to improper inclination during handling.
Model
1 phase 5/7/9kW
1 phase 12/14/16kW
3 phase 12/14/16kW
06
Foam
Protect Angle
The hook and
barycenter of the
unit should be on
a line in vertical
direction to
prevent improper
inclination
CAUTION
A
B
(unit:mm)
A A B
350 355 285
540 390 255
500 400 275
C
V.1