Maintenance And Cleaning - DeLonghi FXN18AG Instruciones Importantes

All manuals and user guides at all-guides.com
could mark it.
• Wind the power cable.
• Store the iron in a vertical position.

MAINTENANCE AND CLEANING

After use, always wait until the iron is cold before putting
away. Allow to cool in a vertical position. Keep the surface
of the plate clean. Do not rest or use the iron on zips, hooks,
rings etc to avoid scratching the plate. Clean the plate with
a damp cloth only, never use abrasives or solvents. If the
amount of stream drops during use, this could be caused by
a build-up of limescale. To remove, proceed as follows:
• fill the tank to the "MAX" level;
• plug the appliance into the outlet and place the
thermostat in the MAX position. When the iron has
reached the required temperature (light off), unplug the
appliance;
• place over a sink in a horizontal position;
• press the SELF CLEAN button;
• shake the appliance gently to drain the water in the tank
through the plate, taking the impurities with it.
• release the SELF CLEAN button;
• plug the appliance into the outlet and leave in operation
for at least two minutes to dry the plate.
• unplug the appliance from the outlet. Leave the iron to
cool and clean the outside with a soft cloth.
SCALE PREVENTION SYSTEM (ANTICALC)
The ANTICALC resin filter installed in the tank filters impurities, thus
ensuring constant steam delivery during ironing. The resin softens
the water and improves the performance of the iron over time.
11