Steam Ironing - DeLonghi FXN18AG Instruciones Importantes

All manuals and user guides at all-guides.com
the rating plate of the iron. The outlet must be efficiently
grounded.
The first time you use the iron, remove the plate protection.
Note: When used for the first time, the appliance may give
out smoke and an odor for several minutes. This is caused
by heating and subsequent drying of the sealers used in
assembling the steam generator. You are recommended to
ventilate the room.

STEAM IRONING

Before steam ironing, make sure the fabric is suitable for this
kind of ironing. The machine works with normal tap water.
If the water is very hard, we suggest using demineralized
water diluted 50/50 with tap water. Never use
demineralized water. Never use chemical substances or
detergents (e.g. perfumed water, essences, descaling
solutions, etc).
a) Before filling the tank, make sure the steam regulator E
is in the
the power cable is unplugged from the outlet.
b) Open the cover of the opening C and pour the water
into the iron (fig. 2). It is important that the iron is
always unplugged from the outlet every time you fill or
top up the water in the tank.
c) Plug the iron into the outlet.
d) A special segment
identifies the steam range. The steam will be wet if the
thermostat pointer H is at the beginning of the segment
and dryer if it is towards the end. Make sure the fabric
to be ironed is suitable for steam ironing. When using
position ("dry" position) (fig. 1). Make sure
7
on the thermostat knob H