Before Use; Product Assembly - cecotec READY WARM 8200 POWER QUARTZ SMART Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
ENGLISH

3. BEFORE USE

Take the product out of the box.
Remove all packaging materials. Keep the original box.
Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
Check that all connections are completely secure and that the device is securely positioned
before using it.

4. PRODUCT ASSEMBLY

Wall mounting
The heater housing must be at least 30 cm from the ceiling,
50 cm from side-walls and 1.80 m above the floor.
This appliance must be fixed to a sturdy wall made from
cement or stone. Do not attach to wooden walls or walls
made from flammable materials. Use the wall bracket
provided; do not use any other supports or attachments.
Drill 3 holes in the wall to match the wall bracket holes and
attach the wall bracket using the 3 screws provided. The
curved part of the device must be facing upwards, leaving
the device bracket holes at the bottom. The wall bracket
must be fixed horizontally.
Hang the heater onto the wall bracket. The support element
fixed to the back of the heating unit must rest on the curved
part of the wall bracket; the screws must be placed into the round part of the keyhole-
shaped screw holes and gently pushed down until the device is firmly fixed.
Check that the appliance is firmly fixed to the wall and in full horizontal position before
using.
Assembling the stand
Place the bottom section of the stand (7) with the fastening plate onto the base (6) of the
stand, making sure the screw holes are aligned. Insert the 3 bolts through the holes and
tighten them firmly. Remove the cable holder and place the protective cover over the bolt
connections.
Fix the mid-section of the stand (8) to the bottom-section (7) and fasten it into place with
one of the screws. Then, attach the top section stand (9) to the middle section in the same
way by using a screw.
34
READY WARM 8200 POWER QUARTZ SMART

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

05360

Tabla de contenido