HTW P27 Serie Manual De Usuario página 72

4 Installation
Step three: Preparing the adjustable window slider
Depending on the size of your window, adjust the size of the window slider.
C
Note: Once the exhaust hose assembly and adjustable window slider are prepared,
choose from one of the following installation methods.
Type 1: Hung window or sliding window installation (optional)
Make sure the hook of the adaptor is aligned with
the hole seat of the air outlet.
Hole seat
Hook
Lower groove
adaptor
Window slider A
Foam seal B
(Adhesive type shorter)
Foam seal A
(Adhesive type)
Make sure the adaptor is inserted into the
lower groove of the air outlet.
Bolt
Window slider B
or
Foam seal A
(Adhesive type)
70
Foam seal B
(Adhesive type
shorter)