Tabla de contenido
Publicidad
4
Installation
Type 2: Wall installation (optional)
1. Cut a 125mm (4.9inch) hole into the wall for the wall exhaust adaptor B. 2. Secure the wall exhaust
adaptor B to the wall using the four anchors and screws provided in the kit. 3. Connect the exhaust
hose Assembly(with wall exhaust adaptor A) to the Wall exhaust adaptor B.
C
Note: Cover the hole using the adaptor cap when not in use.
Note: To ensure proper function, do not overextend or bend the hose. Make sure that
C
there is no obstacle around the air outlet of the exhaust hose (in the range of 500mm)
in order to the exhaust system works properly. All the illustrations in this manual are
for explanation purpose only. Your air conditioner may be slightly different. The actual
shape shall prevail.
Expansion anchor
position
Wall exhaust
adaptor B
Adaptor cap
max 120cm or 47 inch
min 30cm or 12 inch
72
Publicidad
Tabla de contenido
