DeLonghi MAGNIFICA EVO ECAM296Y Serie Instrucciones De Uso página 59

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PROBLEM
The coffee is weak or not creamy enough. The coffee is ground too coarsely.
The coffee is under extracted, weak or not
creamy enough.
The coffee is delivered too slowly or drop
by drop (over extracted).
Coffee does not come out of one or both
spouts.
The coffee delivered is watery.
The infuser cannot be extracted.
At the end of descaling, the appliance
requests a third rinse
The milk has big bubbles
Milk beverages are not enabled
POSSIBLE CAUSE
The coffee is unsuitable.
Coffee not fresh.
The coffee is ground too finely.
Impurities have been detected in the in-
ternal circuits
The coffee nozzles are blocked.
The pre-ground coffee funnel is clogged.
The machine has not been turned off.
During the two rinse cycles, the water
tank has not been filled to the MAX level
The milk is not cold enough, or is not
semi-skimmed or skimmed.
The milk container lid is dirty.
Vegetable beverages are being used.
The milk container is not correctly insert-
ed, or there is not enough milk to prepare
the requested beverage.
Several milk beverages have been pre-
pared in succession and the machine
needs to heat up to the ideal temperature
before making the next beverages.
59
REMEDY
Adjust the grinding level ("8.6 Réglage
du moulin à café"r"). The effect is not
visible until at least 2 coffees have been
made.
Use coffee for espresso machines.
The coffee pack has been opened for too
long and has lost its taste.
Adjust the grinding level ("8.6 Réglage
du moulin à café"r"). The effect is not
visible until at least 2 coffees have been
made.
Wait until the machine is ready for use
again, and proceed to select the required
beverage. Contact customer services if
the problem persists.
Clean the nozzles with a cloth. Any en-
crusted deposits can be removed with a
toothpick, if necessary.
Open the door and clean the funnel with
the help of a brush.
Turn the machine off by pressing the
button.
Empty the drip tray, fill the tank up to the
MAX level and perform the third rinse cycle.
Use skimmed or semi-skimmed milk at
refrigerator temperature (about 5° C). If
the result is not as expected, try a differ-
ent brand of milk.
Remove the components and clean them
thoroughly as described in section "17.
Nettoyage de la carafe à lait".
The effect varies widely depending on the
nutritional properties of the beverages.
Prepare the milk container and insert it
correctly in the machine.
Wait until milk beverages are again ena-
bled on the control panel.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido