ARENDO 305598 Manual Del Usuario página 33

8. Causes of errors
Error
Light is not
working
Heating plate is
not heating up
Status LED is off
and the heating
plate does not
heat up
Uncooked rice
English
Cause
• Power cable is not con-
nected
• Power PCB is damaged
• PCB is disconnected
• Motherboard is damaged
• Power cable is not properly
connected
• Power cable is faulty
• Appliance is faulty
• Heating plate is faulty
• PCB is faulty
• too little or too much rice
• Rice to water ratio is wrong
• The cooking vessel is not
placed properly
• There are objects between
heating plate and cooking
vessel
• Sensor damage
• The heating plate is faulty
Troubleshooting
• Check power supply
• Check switch, power
plug, thermal fuse
• Contact our customer
service
• Check power supply
• Contact our customer
service
• Contact our customer
service
• Adjust the amount of
rice / water
• Rotate the cooking
vessel left and right and
try again. Make sure
that the cooking vessel
is resting on the heating
plate
• Contact our customer
service
33