Logitech G PRO RACING WHEEL Guia De Instalacion página 12

TF Audio
Sets the strength of the Audio effects output for games that support
TRUEFORCE The Audio effects will replicate different aspects of
your racing title such as engine note, tire grip or road surface
NOTE:
It is usually recommended that the Trueforce Audio setting is set
at a low enough level to receive the additional information that
it provides without overwhelming the overall experience Think of
the level of vibration that you get through the wheel of an actual
car and aim for that Some titles provide additional levels of control
within their control options menus by allowing you to adjust individual
elements of the audio; separating out the engine, tire and road audio,
for example
Force Feedback Filter
Each driving simulation will run the physics and force feedback
at different speeds - some only at 60Hz, with others 300Hz or more
With a highly responsive direct drive wheel, it's desirable to filter out
frequencies above which the simulation can't run at If you leave
this at its default AUTO setting, then this will cover the vast majority
of simulations and provide a smoother experience If you wish, you can
manually adjust this with settings from 1 (least filter) to 15 (maximum
filter), allowing you to feel some more of the smaller effects that some
titles produce, at the expense of introducing a bit more noise into
the force feedback
12 ENGLISH