Noise information
Typical A-weighted emission sound pres-
sure level (L
)
pA
Uncertainty for the sound pressure level
(K
)
pA
Typical A-weighted sound power level
(L
)
WA
Uncertainty for the sound power level
(K
)
WA
Vibration information
Triaxial vibration value (a
Uncertainty (K)
5
Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1
Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 21
5.2
Inserting the battery
WARNING
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
3. Check that the battery is seated securely.
5.3
Removing the battery
1. Press the battery release button.
2. Remove the battery from the product.
5.4
Fall arrest
WARNING
Risk of injury by falling tool and/or accessory!
▶ Use only the Hilti tool tether recommended for your product.
▶ Prior to each use, always check the attachment point of the tool tether for possible damage.
24
English
SPNCN
98 dB(A)
3 dB(A)
109 dB(A)
3 dB(A)
SPNCN
)
B 2255
13.1 m/s²
h
B 22255
13.3 m/s²
B 2255
1.5 m/s²
B 22255
1.5 m/s²
SPNRN
SPNRL
94 dB(A)
95 dB(A)
3 dB(A)
3 dB(A)
105 dB(A)
106 dB(A)
3 dB(A)
3 dB(A)
SPNRN
SPNRL
13.8 m/s²
13.2 m/s²
14.6 m/s²
13.5 m/s²
1.5 m/s²
1.5 m/s²
1.5 m/s²
1.5 m/s²
2327535
*2327535*