Technical Data - Hilti NURON SPN 6-22 Manual De Instrucciones

4

Technical data

The nibbler comes with the SPN­CN, SPN­RN or SPN­RL accessory tool as standard. The individual
accessory tools are also available as optional accessories and are compatible with every as-delivered
version of the power tool.
Rated voltage
Weight in accordance with EPTA Proce-
dure 01, without battery
Stroke rate at idle speed
Starting hole diameter
Smallest radius for curved cut-outs
Radius
Cutting track width
Permissible steel thickness, steel up to
400 N⁄mm²
Permissible steel thickness, steel up to
600 N⁄mm²
Permissible steel thickness, steel up to
800 N⁄mm²
Permissible material thickness, aluminum
up to 250 N⁄mm²
Storage temperature
Ambient temperature for operation
4.1 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
*2327535*
SPN­CN
21.6 V
2 kg
620 /min ...
1,370 /min
17 mm
4.0 mm
•/•
8.0 mm
2.0 mm / 14 ga
1.5 mm / 16 ga
1.0 mm / 20 ga
2.5 mm / 10 ga
−20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃
2327535
SPN 6-22
SPN­RN SPN­RL
21.6 V 21.6 V
2 kg 2.2 kg
620 /min ... 620 /min ...
1,370 /min 1,370 /min
24 mm 24 mm
•/• •/•
50 mm 50 mm
5.0 mm 5.0 mm
2.0 mm / 14 ga 2.0 mm / 14 ga
1.5 mm / 16 ga 1.5 mm / 16 ga
1.0 mm / 20 ga 1.0 mm / 20 ga
3.0 mm / 9 ga 3.0 mm / 9 ga
−20 ℃ ... 70 ℃ −20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃ −17 ℃ ... 60 ℃
21.6 V
See the end of these operating in-
structions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
English 23