The open end and hole points
toward the same direction.
22. Using the pilot holes as a guide, attach the separated Slide Track (U) to the Left Side Panel (B) with three
14 mm Screws (6).
23. Fasten the Left Slide Track (CL) to the Left Side Panel (B) with three 14 mm Screws (6).
6
U
C
24. Repeat the same procedure to combine Slides Tracks (U and CR) with the Right Side Panel (C).
Assembly Instructions
U
Mounting Holes
CL
The roller and hole points
toward the same direction.
6
U
B
U
Mounting Holes
CR
The open end and hole points
toward the same direction.
6
CR
C
13
6
CL
B
The roller and hole points
toward the same direction.