The groove is
located at back
6. Stand the previous assembly at its back panel and insert the Small Wood Dowels (4) into the inner holes
on the Drawer Side Panels (I and J).
7. Position the Drawer Front Panel (G) onto the inserted Wood Dowels (4) and fasten it in place by
engaging six Small Cam Locks (1). (Refer to page 2 on Cam Lock system operation supplement). Make
sure that the Drawer Bottom Panel (K) fits securely into the groove of the Drawer Front Panel (G).
7
7
7
8. Fasten the Left Slide Runner (DL) to the Drawer Left Side (I) using three 14 mm Screws (7).
9. Repeat the same procedure to attach the Right Slide Runner (DR) to the Drawer Right Side (J).
Utility Drawer Assembling
4
4
K
J
J
7
DR
7
7
7
G
I
H
I
DL
The end roller
faces backward