K
3
3
4. Turn the Desk Top (I) upside down as shown.
5. Attach the Left and Right Legs (J and K) to the Desk Top (I) by using the Wood Dowels (3).
6. Insert the 35 mm Bolts (6) with the Lock Washers (7) and Flat Washers (8) from inside of desk apron
through the pre-drilled holes and screw into threaded inserts in the Legs (J and K). As shown.
7. Stick one Rubber Pad (11) onto the bottom of each leg (J and K) as shown.
8. Ask for assistance to stand the unit upright and position it at the desired location.
9. Now, insert the removed side drawers into Desk Top (I). To place the drawer back, simply push the ball
bearing cart all the way to the end of the slides (on both sides), and align the slide runners on the
drawers with the slides track on the unit. Push it carefully inside until it stops.
NOTE: If the drawer does not go smoothly, please take it out and repeat the step.
Assembly Instructions
J
3
3
3
I
I
K
I
7 8
7 8
6
6
6
7
J
J/K
7 8
11
11
J/K