Unpacking, Handling And Installation Instructions - Fimar SE/1550 Uso Y Mantenimiento

UNPACKING, HANDLING AND INSTALLATION INSTRUCTIONS

GB
– The appliance is delivered packaged in a specific container and, if necessary, suitably
stabilised with shockproof material to ensure its integrity.
Packaging may be on a pallet according to appliance features, destination and transport
means to facilitate handling.
All information required for handling (loading and unloading) in safe conditions is indica-
ted directly on the packaging.
– The package must be handled according to its specifications (weight, dimensions, etc.).
For limited dimensions and weights, the package may be handled manually. Otherwise,
use a lifting device with suitable capacity.
Upon receiving the appliance, make sure all components are integral. In the event of da-
mages or missing parts, contact your local dealer to arrange for future procedures.
– Installation must be performed by expert and authorised personnel who must previously
ensure that the electrical mains meet specific current laws, regulations and standards in
effect in the country of use.
– Before installing the appliance, make sure the selected site is suitable, sufficiently ven-
tilated and lit, stable and with surrounding areas sufficient for easy cleaning and main-
tenance. Also make sure the support surface is stable, level and easy to clean to avoid
the risk of dirt accumulations and food product contamination.
DO NOT lubricate parts in motion.
DO NOT remove any safety device (mobile guard, interlocked guard,
etc.) when the appliance is running.
GENERAL AND SAFETY
- 8 -
INFORMATION
English language