High Altitude Operation; Operating Conditions - Simpson SSTP71007 Manual De Uso Y Cuidado

High Altitude Operation

This engine will have proper engine performance and emission control when it is operated
at or below an altitude of 5000 feet (1524 meters). This engine requires a high-altitude
carburetor kit to ensure proper engine performance and emission control when operated
at altitudes above 5000 feet (1524 meters). Operating the engine with the wrong engine
configuration above 5000 feet (1524 meters) may increase its emissions and decrease
fuel efficiency, and hurt performance. To obtain a high altitude carburetor kit, contact your
nearest authorized service center.
Operating the engine with a high-altitude carburetor jet kit at an altitude below 5000 feet
(1524 meters) will cause the engine to run too hot. Overheating the engine could result in
serious engine damage. To avoid damaging the engine, make sure the correct carburetor
kit is installed and the air/fuel mixture is correctly set for your altitude.

Operating Conditions

Before each use, check for loose or damaged parts, oil or fuel leaks, and/or any other
condition that may affect proper operation. Repair or replace all damaged or defective parts
immediately. Always keep all safety guards in place and in proper working order. For safety
reasons, the manufacturer recommends all maintenance and repairs be performed by an
authorized service center.
Before starting the engine, remove any excessive dirt and debris especially from any
cooling vents, exhaust and muffler, and starter recoil areas. Never move or tip the
pump while operating. Use pump only for its intended purpose. If you have questions
about the proper use of your pump, please contact customer support at 1-877-362-4271
or cservice@fna-group.com.
Untrained persons, young children, and pets can be seriously injured or killed if allowed
to incorrectly operate or play with running pump. Be sure anyone operating the pump
receives proper instructions, understands safe operation, and has read the owner's
manual before operating this product. Do not let children operate the pump without
parental supervision. Keep young children and pets away from the pump while it is
running. Always turn off the pump before leaving the area.
Failure to inspect this product before use could result in a hazardous situation
resulting in product damage, serious injury and/or death. To avoid these hazards,
inspect the pump before each use. Check for loose or damaged parts, signs of oil or
fuel leaks, missing guards, plugged cooling vents, or any other condition that may
affect proper operation. Repair or replace all damaged or defective parts, keep all safety
guards in place and in proper working order before using the pump.
Page 8
ALTITUDE
UNTRAINED OPERATION
INSPECT BEFORE OPERATING