Connecting Suction Hose Strainer; Hose Placement - Simpson SSTP71007 Manual De Uso Y Cuidado

Connecting Suction Hose Strainer

1. Thread the strainer barb into the strainer.
2. Place the suction hose over the strainer barb and secure it with a strainer hose clamp.
1
1. Suction hose (not included)
2. Strainer hose clamp
3. Strainer barb
4. Strainer

Hose Placement

1. Place the pump on a level surface.
2. Completely immerse strainer but do not rest it on the bottom of the water source.
3. Do not exceed the maximum suction head and total head lifts as listed in the
SPECIFICATIONS section of this manual.
NOTE: The suction head lift should always be less than the discharge head lift.
Total head lift
Page 13
2
3
Discharge head lift
4
Suction head lift