Starting; Starting The Engine - Simpson SSTP71007 Manual De Uso Y Cuidado

Starting the Engine

1. Complete the steps in the OPERATING CHECKLIST, CONNECTING HOSES, and
PRIMING THE PUMP sections of this manual before starting the engine. Failure to do
so could damage your engine and pump.
Attempting to start the engine incorrectly or using the pump incorrectly can result in
engine and/or pump damage, and may cause serious injury or death. To avoid engine
and/or pump damage and serious injury or death be sure to read, understand, and follow
the steps outlined in the OPERATING CHECKLIST section of this manual before starting
the engine, and follow all the guidelines for proper use of the pump.
2. Turn the engine ignition switch to the ON position.
3. Turn the engine fuel valve to the
ON position (if equipped).
4. Adjust choke as needed:
NOTE: The starting position of the choke will vary depending on the engine temperature. If
starting a cold engine, move the choke lever towards the closed position. If starting a warm
engine, move the choke lever towards the open position.
CLOSED
Page 15

STARTING

OPERATING CHECKLIST
Engine fuel valve
OPEN