BGS technic 8704 Instrucciones De Uso página 9

USE
Rotate the tool counter-clockwise 3-round to
place the adapter that you want to operate and
rotate clockwise until it stops.
Begin squeezing the lever (7) and continue until
the edge of the adapter meets the die.
Finish position (10)
Open the relief valve (4) 1/2-round, then close
tightly.
Grasp the handle and rotate the
tool counter-clockwise to remove
the adapter from the die.
Then loosen the tightening bar and remove the tube.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed