Cleaning And Maintenance - cecotec BOLERO AGUAZERO 6000 Manual De Instrucciones

ENGLISH
7. Start/Pause
Press the Start/Pause button to start or pause the washing cycle.
Programme indicator
8.
It indicates the programmes available.
Display
9.
It shows the remaining time, the delay start, error code, etc.
Indicator on the display
Hour display Water tap Dishwasher salt
- Time: it shows the remaining time, the delay start, error code, etc.
- Water tap: if this indicator is on, it means the water tap is closed.
- Dishwasher salt: if the indicator light lights up, the dishwasher has few salt and needs
more.
- Rinse aid: if the indicator light lights up, the dishwasher has few rinse aid and needs more.
- Child lock: this option allows you to lock the control panel buttons, except for the power
button, so children cannot change the settings of the dishwasher accidentally by pressing
the panel buttons. To lock or unlock the control panel buttons, hold down the powerful
wash and extra dry buttons for 3 seconds.
Starting a washing cycle
Fig. 27
1. Remove all coarse residues from the tableware, avoid using the pre-rinse of the
dishwasher.
2. Take out the upper and lower baskets, load the tableware and push them back inside. It is
recommended to load the lower basket first and then the upper basket.
3. Fill the detergent compartment.
4. Close the door and press the power button to turn on the appliance. Choose a programme
and the indicator light will light up. Next, press the Start/Pause button, the dishwasher
will start the cycle.
80
Rinse aid Child lock system
Changing the running programme
Fig. 28
- A programme can only be changed if it has been running for a short time, otherwise the
detergent may have already been released or the wash water with detergent may have
already been drained. In this case, the dishwasher needs to be re-set and the detergent
compartment must be refilled.
- If you wish to change the programme when the dishwasher is operating:
Press the Start/Pause button.
1.
2. When the dishwasher stops, select the desired programme with the programme knob.
3. Start the new selected programme by pressing the Start/Pause button.
Introducing dishes during the cycle
Fig. 29
You can add tableware at any time before the detergent compartment is activated.
Press the Start/Pause button.
1.
Wait for 5 seconds and open the door.
2.
3. Add the tableware you forgot.
4. Close the door.
Press the Start/Pause button, the dishwasher will start the cycle within 10 seconds.
5.
WARNING: it is dangerous to open the door in the middle of the cycle, as the hot steam
can burn you.

8. CLEANING AND MAINTENANCE

- The dishwasher cleaning is important to preserve the machine shelf life.
- Make sure that water softener has been adjusted correctly and the correct amount of
detergent is used to prevent limescale build-up.
- Refill the salt compartment when the salt indicator light lights up.
- Oil and limescale may accumulate in the dishwasher over time. If this happens:
1. Fill the detergent compartment, but do not load the tableware.
2. Select a high-temperature programme and let the dishwasher run with no load.
If this operation does not clean the dishwasher enough, use a cleaning agent designed to
3.
be used in dishwashers.
- To lengthen your dishwasher shelf life, clean the device regularly every month.
- Clean the door gaskets and the door regularly with a damp cloth to remove any accumulated
remain or strange object.
- Clean the control panel with a soft and slightly damp cloth.
- Clean the filters and the spray arms at least once a week. If there are food remains or
strange objects in the fine and coarse filters, remove the filters and clean them thoroughly
with water.
ENGLISH
81
AGUAZERO 6000/SILVER