Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CHANGING TABLE ASSEMBLY - SAFETY RESTRAINT
7
7a. Unlock the Restraint Harness
Belts, and place the belts below
the top Panels as shown in the
diagram.
7b. Bring the belt from behind the Top
Rail onto the Top Panel.
7c. Align the Nuts (F) below the Belt
and the Washer (E) and the Bolt
(D) from above the Top Panel so
that the belts stay intact in their
place.
7d. Tighten the Nuts using a wrench
(not provided in the box), and
tighten the Bolts using the Allen
Key (J).
7e. Follow the same steps for the
other side of the belt.
I
Restraint Harness
D
Bolt M6 X 20mm (×2)
www.dreamonme.com/help
E
Washer (×2)
HARNESS ASSEMBLY
(D)
(E)
(I)
(F)
F
Nut (x2)
13
Publicidad
Tabla de contenido
