Dream On Me HYGGE Manual Del Usuario página 7

CHANGING TABLE ASSEMBLY - FEET ASSEMBLY
1
1a. Place all the parts on a soft
surface before assembly. Align
the Left Front and Right Rear Feet
(9) and the Right Front and Left
rear Feet (10) to the Center Base
Rail (8) as shown in the
illustration.
1b. Place the Metal Pins (H) between
the Left Front and Right Rear Feet
and Center Base Rail. Similarly,
place the Metal Pins between the
Right Front and Left rear Feet and
the Center Base Rail.
1c. Position the Half Moon Washer
(G) in the designated slots on the
Center Base Rail. Similarly, attach
the Bolts (B) in the insertions
provided on the Center Base Rail,
fixing them to the Feet.
1e. Tighten the Bolts using the Allen
Key (J) provided. Follow the
above steps for the second
Center Base Rail.
NOTE:
1. Do not overtighten the bolts.
B
Bolt M6 X 45mm (×4)
www.dreamonme.com/help
(9)
(10)
H
Metal Pin (×8)
(9)
(H)
(G)
(8)
(8)
G
Half Moon
Washer (x4)
(H)
(8)
(B)
(10)
(9)
7