Product-Dependent Symbols; Symbols On The Product; Product Information; Safety Instructions - Hilti TE DRS-B Manual De Instrucciones

1.3

Product-dependent symbols

1.3.1

Symbols on the product

The following symbols can be used on the product:
Wear dust mask
1.4

Product information

products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Dust removal module
Generation
Serial no.
2 Safety
2.1

Safety instructions

▶ Study the operating instructions and the safety-relevant information for the system products prior
to use and comply with them always.
▶ Use the module only in combination with the power tools stated in Fig. 1, otherwise there is a risk of
injury.
▶ Use the product and accessories only when they are in perfect working order.
▶ Never tamper with or modify the product or accessories in any way.
▶ The product is intended for professional use. The product may be serviced and repaired only by
authorized, trained personnel! This personnel must be specially informed of any possible hazards.
▶ Stay alert, watch what you are doing and use common sense when operating the product. Do not use
the product while you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating the product can result in serious injury.
▶ Working on the material may cause it to splinter. Flying fragments present a risk of injury to the eyes and
body. Wear eye protection, a hard hat and ear protection while the product is in use.
▶ Use power tools, accessories, insert tools, etc. in accordance with these instructions. Take the working
conditions and the work to be performed into account. Use of power tools for applications other than
those intended can result in hazardous situations.
▶ Risk of injury by falling tools and/or accessories. Before starting work, check that installed accessories
are secure.
▶ Vacuuming water is prohibited.
▶ Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some
examples are: lead or lead-based paints; brick, concrete and other masonry products, natural stone
and other products containing silicates; certain types of wood, such as oak, beech and chemically
treated wood; asbestos or materials that contain asbestos. Determine the exposure of the operator and
bystanders by means of the hazard classification of the materials to be worked. Implement the necessary
measures to restrict exposure to a safe level, for example by the use of a dust collection system or by
the wearing of suitable respiratory protection. The general measures for reducing exposure include:
▶ working in an area that is well ventilated,
▶ avoidance of prolonged contact with dust,
▶ directing dust away from the face and body,
▶ wearing protective clothing and washing exposed areas of the skin with water and soap.
▶ Whenever possible, use a Hilti-recommended dust extractor suitable for the application.
▶ Use an anti-static suction hose in order to avoid electrostatic effects.
▶ Make sure that the adapter and the outside surfaces of the tool holder are free of oil and grease. If the
TE DRS-B dust removal module is installed with oily and/or greasy parts, the TE DRS-B dust removal
*249449*
249449
TE DRS­B
01
English 7