Technical Data; Vibration Level; Accessories - Optionally Available - Batavia BT-NXS003 Manual De Usuario

• We recommend that you clean your
electric power tool immediately after
each use.
• Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap. Do not use any cleaning or solvent
materials; these can attack the device's
plastic components. Make sure that no
water can get inside the electric power
tool.
• Do not let liquids of any kind enter the
Nexxsaw.
• From time to time check that all screws
are firmly secured.
• Store the Nexxsaw and the accessory
indoors in a dry place that is protected
from dust, dirt and extreme
temperatures.
• Store the Nexxsaw out of reach of chil-
dren and persons in need of supervision.

11. Technical data

Battery voltage: . . . . . . . . . . 12 V Li-Ion
No load speed: . . . . . . . . . . . 4200 min
No load chain speed: . . . . . . . . 7.45 m/s
Total sword length: . . . . . . . . . .156 mm
Effective sword length: . . . . . . . .120 mm
Max. cutting depth: . . . . . . . . . .120 mm
Product weight without accessories:
. . . . . . . . . . . . . . . . . . . . . . . 1.5 kg
Sound pressure level L
Multi-saw: . . . . . . . . . . . . 78.9 dB(A)
Pruner: . . . . . . . . . . . . . . 81.0 dB(A)
Uncertainty K
pA
Sound power level L
Multi-saw: . . . . . . . . . . . . 89.9 dB(A)
Pruner: . . . . . . . . . . . . . . 89.1 dB(A)
Uncertainty K
WA
Hand/arm vibration
Multi-saw: . . . . . . . . . . . . 0.924 m/s
Pruner: . . . . . . . . . . . . . . 0.686 m/s
Uncertainty K: . . . . . . . . . . . . .1.5 m/s
7064197-Nexxsaw-12V-Ma-2203-29.indb 13 7064197-Nexxsaw-12V-Ma-2203-29.indb 13
pA
: . . . . . . . . . . . . 3 dB(A)
WA
: . . . . . . . . . . . . 3 dB(A)

Vibration level

11.1
The declared vibration total value and the
declared noise emission values have been
measured in accordance with a standard
test method (EN 62841) and may be used
for comparing one tool with another. The
declared vibration total value may also be
used in a preliminary assessment of
exposure.
Warning!
The vibration and noise emission during
actual use of the power tool can differ from
the declared total value depending on the
ways in which the tool is used, in particular,
what kind of work piece is machined.
It is necessary to identify safety measured
to protect the operator that are based on an
estimation of exposure in the actual condi-
tions of use (taking account of all parts of
the operating cycle such as the times when
the tool is switched off and when it is run-
ning idle in addition to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
-1
tion exposure include wearing gloves while
using the tool, limiting working time, and
using accessories in good condition.
12. Accessories – optionally
available
Battery . . . . . . . . . . Item-No. 7064260
Charger . . . . . . . . . . .Item-No. 7064261
Chain . . . . . . . . . . . Item-No. 7064263
Bar . . . . . . . . . . . . . .Item-No. 7064262
Bar protector . . . . . . . Item-No. 7064268
18 V Chain Sharpener . . Item-No. 7063640
2
2
2
English
13
09-05-2022 12:38 09-05-2022 12:38