Product Specifications - HOMBLI Smart Smoke Detector Manual De Instrucciones

10. Product specifications

Type
Alarm volume
Silencing time
Dimensions
Working area
Wireless connection
Battery
Battery life
Operating current
Working temperature
Working humidity
Smoke sensitivity
Important safety instructions
• Make sure you have read and understood the manual before installing and using this product. Only use this product in the ways
described in this manual.
• Replace the device when the manufacturing date has been reached. This date can be found on the sticker on the product.
• The device is only suitable for residential use indoors.
• If the product is defective, do not attempt to repair the device but replace the device with a new one.
• Do NOT paint over or cover the product.
The notifications in the Hombli app requires a functional Wi-Fi connection. If the Smart Smoke Detector detects smoke, but has
no connection to your Wi-Fi-network, the alarm will go off like normal. However, you will NOT get a notification on your phone.
Therefore, you should never solely rely on these notifications.
All electronic devices, including this Smart Smoke Detector, have a chance of failing. There is a chance that, in case of a fire, the device
will not warn you because the alarm did not go off, or because the alarm did not go off in time. Make sure you test your Smart Smoke
Detector regularly to maximize the chance of being alerted in time by the device.
Photoelectric smoke alarm
≥85 dB at 3m
~10 min
120 * 31.5mm
Up to 40m²
Wi-Fi, 802.11 b/g/n
Non-removeable CR14505, DC3V Lithium battery
10 years
<30μA (standby); <70μmA (alarm)
0°C~40°C
≤95%RH non-condensing
M = 0.09 dB/m, M
min max
= 0.17 dB/m