Sanremo YOU Manual De Instrucciones página 66

YOU
Connect the intake pipe (2) to a softener (4) with the
impurity filter (3) between them.
- Before the softener (4), install a shuttering tap (5)
to separate the water system from the machine.
1
WARNING: If the line pressure
exceeds 4 bar, install a pressure
reducer. Only supply with cold
water.
Tank
To fill the tank, lift the lid and pour water until the
maximum level is reached.
2
4
3
The machine is set to tank mode by default. To
switch from tank mode to mains mode, remove the
cup warmer and use a slotted screwdriver to turn the
metal lever clockwise as shown in the image.
5
Near the point of interest there is the label below:
OFF
Mains supply mode is shown on the left, while tank
mode is on the right.
66
Connections
IMPORTANT: The following must be
performed only by a specialised
and authorised technician.