Lcd Display; Hold Button; Data Hold; Disable Auto-Off Function - AEMC 500 Manual De Instrucciones

2.2

LCD Display

Low battery
AC Input
AUTO Auto Ranging

Data Hold

Continuity with beeper
Ω Ohm function selected
V Voltage function selected
A Current function selected
2.3

Hold Button

2.3.1 Data Hold
• The last reading may be held on the display by pressing
the HOLD button. The
• When the data is no longer needed, release the hold func-
tion by pressing the HOLD button again.
2.3.2

Disable Auto-off Function

• Turn rotary switch to the OFF position
• Press and hold down the button, then power the meter
ON by selecting a range.
• Upon the next power ON, the auto-off function will be
reactivated.
Clamp-on Meter Model 500
AUTO
symbol will be displayed.
Ω
VA
H
5