TFA 35.1087 Instruction Manual página 7

TFA_No_35.1087_Anl_01_23
Indoor weather station
5. Operation
• Open the battery compartment and insert two batteries 1.5 V
AAA, polarity as illustrated. A short beep will sound and all LCD
segments will light up for about 2 seconds.
• The unit is now ready to use.
• By pressing the DOWN button the temperature unit can be
changed from °C to °F.
• To enter calendar mode, press MODE button. The date is dis-
played.
• To enter alarm mode, press 2 x MODE button. The alarm time is
displayed.
6. Setting Mode
• Press MODE button for 2 sec. to enter the respective setting
mode and select all settings one after the other.
• When the digits are flashing set the desired time by pressing the
UP or DOWN button. Hold and press the button for a fast count.
• The instrument will quit the setting mode, if there is no button
used within 10 seconds.
A. Setting of Time
Press MODE button (2 sec.)
Select Time Hours by pressing UP/DOWN button
Press MODE button
Select Time Minutes by pressing UP/DOWN button
Press MODE button
Exit setting mode
B. Setting of Calendar
Press MODE button
Enter Calendar mode
Press MODE button (2 sec.)
Select Date Year by pressing UP/DOWN button
Press MODE button
Select Date Month by pressing UP/DOWN button
Press MODE button
Select Date Year by pressing UP/DOWN button
Press MODE button (twice)
Exit setting mode
02.01.2023 15:01 Uhr
– 12 –
Seite 7
Indoor weather station
C. Setting of Alarm
Press 2 x MODE button
Enter Alarm mode
Press MODE button (2 sec.)
Select Alarm time Hours by pressing UP/DOWN button
Press MODE button
Select Alarm time Minutes by pressing UP/DOWN button
Press MODE button (twice)
Exit setting mode
7. Activate/turn off Alarm
• To activate/turn off the alarm function, press UP button in alarm
mode. The alarm symbol appears or disappears on the current
time display.
• Press any button to stop the alarm.
8. Snooze function
• Once the alarm starts to ring (backlight turns on briefly), you
can activate the snooze function by pressing the SNZ button.
The alarm symbol flashes and the alarm will be interrupted.
9. MAX/MIN values:
• Press the MAX/MIN button and the highest temperature and
humidity values are displayed (MAX).
• Press the MAX/MIN button again, the display shows the lowest
values.
• There is an automatic daily reset of maximum and minimum val-
ues (midnight 0:00).
10. Weather symbol
• The instrument has no atmospheric pressure sensor. The
weather symbol is based on the changes of humidity values.
There are 5 different coloured weather symbols (sunny, slightly
cloudy, cloudy, rainy, strong rain).
11. Comfort level
• On the display appears a smiling or sad face icon to indicate the
comfort level of indoor climate.
– 13 –