Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed before
attempting to perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Cleaning up chip discharge openings
Clean the chip discharge openings regularly.
Use a compressed air to clean the clogged chip dis-
charge openings.
Sharpening blades
For conventional planer blades only
Always keep your planer blades sharp for the best perfor-
mance. Use the sharpening holder (optional accessory) to
refine the planer blade edges safely and effectively.
1
Fig.57
► 1 . Sharpening holder 2. Blade
1.
Loosen the two wing nuts in the sharpening holder.
2.
Slip the back ends of the planer blades into the
mounting slots as far as they will go with the cutting
edges to be sharpened facing downwards.
3
4
Fig.58
► 1 . Sharpening holder 2. Wing nut 3. Blades
4. Cutting edges 5. Mounting slots 6. Bolt head
3.
Tighten the wing nuts to secure the planer blades in place.
2
2
1
5
6
24 ENGLISH
4.
Soak a dressing stone in water for 2 or 3 minutes
before sharpening.
5.
Hold the sharpening holder firmly, and gently place
the cutting edges over the surface of the dressing stone.
6.
Sharpen the cutting edges by moving the sharpen-
ing holder back and forwards.
Fig.59
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
High-speed steel Planer blade
•
Tungsten-carbide Planer blade (For longer blade life)
•
Mini planer blade
•
Sharpening holder assembly
•
Blade gauge assembly
•
Set plate set
•
Guide rule assembly
•
Dressing stone
•
Dust bag assembly
•
Elbow
•
Chamfering rule assembly
•
Wireless unit
•
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
Publicidad
Tabla de contenido
