Grounding Instructions - Ashdown Engineering AGM Serie Guia Del Usuario

The exclamation mark contained within a triangle is intended to alert the user to important operat-
ing and servicing instructions contained in the literature accompanying this product.
The lightning flash within a triangle is intended to alert the user to the presence of un-insulated
dangerous voltage within the product enclosure that may be of sufficient magnitude to constitute
This highlights the presence of dangerous voltages within the equipment enclosure. Never try to
This product must be grounded (earthed). If it should malfunction or break down the grounding
provides the path of least resistance for the electric current, to reduce the risk of electric shock.
This product is equipped with a power cord which contains a grounding conductor and a ground-
ing plug. The plug must be plugged into a compatible mains outlet that is properly installed and
grounded in accordance with the local electrical safety codes applicable to your country.
Improper connection of the grounding conductor can result in the possibility of an electric shock.
If you are in any doubt about the ground connection check with a qualified electrician before
using this product. NEVER modify the mains power cord. Have a suitable mains outlet fitted!
The wires contained within the supplied power cord are colour coded as follows:
GREEN & YELLOW – GROUND OR EARTH CONDUCTOR
Other markings appear on the rear panel of the amplifiers as follows: back of the amplifier has
The CE mark attached to these products means it conforms to EMC(89/69/EEC) ,(93/68/EEC) and
7) WARNINGS USED ON THIS EQUIPMENT
Marking here
a risk of electric shock.
Marking here
operate the unit out of the enclosure.

8) GROUNDING INSTRUCTIONS

DANGER!!
BROWN – LIVE CONDUCTOR
BLUE – NEUTRAL CONDUCTOR
9) OTHER MARKINGS
some other markings on it as follows;
LDV(72/23/EEC).
Marking here