Melchioni Family WARMY WALL Folleto De Instrucciones página 17

OPERATION INSTRUCTION
1. Before inserting the plug into an electrical outlet, make sure that the electrical supply in your
area matches that on the rating label on the unit.
2. Carefully remove the heater from the plastic bag and the carton.
Place the heater on a firm level surface, setting the master button to "-"position.plug the cord
3.
set into a AC220-240V~ electrical outlet,with "BEE" sounds the "Power"light is on.
1. General Using OPERATION
1.Turn the heater ON by pressing remote control the ON/OFF button, the unit will blow the cold air
and " " light is on.
Pressing the "MODE" button on remote control, the unit will blow the warm air and both"
2.
"and" " lights are on.
Pressing the "MODE" button second times on remote control,the unit will blow the hot air and both
" "" " lights are on.
Pressing the "MODE" button Three times on remote control, the unit will blow the cold air
3.
and "Fan/M" light is on.
Pressing the "
4.
down.Pressing again will be closed swing function.
PS: For smart operate, customer only press the one start button near about master
button,the heater will working with hot air and both "
on.
Smart button view
Master Button
One start
Button
Button
" button on the remote control ,the unit will Louver swing up and
"" "" "lights are