Melchioni Family WARMY WALL Folleto De Instrucciones página 18

2. 24H Timer FUNCTION
1.Open the appliance as working conditions,(fan,warm,hot are all ok).This function through by
Remote control "
" button .
2. Press " " button ,set the timer up to 24 hours,keep press " " button to increase the hours
from 00:00--24:00(01:00=1hour,...24:=24:00 hours ect.) and the " " light is on.
PS: set as "00:00" means no set timer ,the " " light is off.
3. THERMOSTAT INSTRUCTIONS
1. Open the appliance as working conditions,(fan,warm,hot are all ok).This function only through
by Remote control.
2. To adjust temperature, press the " " to set the desired temperature and the
temperature set from 10℃ to 49℃.
3. When the air temperature drops 2 degree below the set temperature, the heater will start
heating with " "(2000W).
4. When the air temperature high 1 degree or ≤ the set temperature, the heater will blow the cold
air.
4. Weekly Timer FUNCTION
1. Open the appliance as working conditions,(fan,warm,hot are all ok).This function only through by
Remote control.
2. Before turn on the heater,set the time as real time.
WEEK Press "Set" button,"1"light twinkle, press "
two buttons set the week from 1--7
(1=Monday...7=Sunday ect.)
HOUR Press "Set" button again,LED display front "00" twinkle, press"
two buttons set the
Hours from 01--00(01=1 o'clock,02=2 o'clock...00=24 o'clock ect.)
MINUTE Press "Set" button once more,LED display behind "00" twinkle, press "
two
buttons set the minutes from 00--59(01=1 Minute,02=2 Minute ect.)