Safety Data; Hyspin Vg32 Oil Safety Data; Molylithium Grease Ep 3753 - Safety Data - Stanley 71502 Traducción De Instrucciones Originales

E N G L I S H O R I G I N A L I N S T R U C T I O N

7. SAFETY DATA

7.1 HYSPIN VG32 OIL SAFETY DATA

First Aid
SKIN:
Unlikely to cause harm to the skin on brief or occasional contact but prolonged or exposure may lead to dermatitis.
Wash skin thoroughly with soap and water as soon as reasonably practicable. Remove heavily contaminated clothing and
wash underlying skin.
Launder contaminated clothing.
ORAL:
Unlikely to cause harm if accidentally swallowed in small doses, though larger quantities may cause nausea and diarrhoea.
If contamination of the mouth occurs, wash out thoroughly with water.
Except as a deliberate act, the ingestion of large amounts of product is unlikely. If it should occur, do not induce vomiting;
obtain medical advice.
Take person to nearest medical centre.
EYES:
Unlikely to cause more than transient stinging or redness if accidental eye contact occurs.
Wash eyes thoroughly with copious quantities of water, ensuring eyelids are held open. Obtain medical advice if any pain or
redness develops or persists.
Disposal:
Remove all spills with inert absorbent material. Ventilate spill area. Place contaminated materials in a disposable container
and dispose in a manner consistent with local regulations.
Protecting the Environment:
Separate collection. This product must not be disposed of with normal waste. Should you fi nd one day that your product
needs replacement, or if it is of no further use to you, do not dispose of it with regular waste.
Make this product available for separate collection. Separate collection of used products and packaging allows materials to
be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for
raw materials. Local regulations may provide for separate collection of electrical products, at municipal waste sites or by the
retailer when you purchase a new product. You can check the location of your nearest authorized repair agent by contacting
your local STANLEY Engineered Fastening offi ce at the address indicated in this manual. Alternatively, a list of authorized
repair agents and full details of
our after-sales service and contacts are available on the Internet at: www.StanleyEngineeredFastening.com
Fire:
FLASH POINT: 200°C.
Extinguish with dry, chemical, foam or carbon dioxide. Do not enter confi ned space without self-contained breathing
apparatus.
Handling:
Use barrier cream or oil resistant gloves.
Storage:
Undercover and consistent with local regulations for infl ammable material.

7.2 MOLYLITHIUM GREASE EP 3753 - SAFETY DATA

Grease can be ordered as a single item, the part number is shown in the Service Kit page 12.
FIRST AID
SKIN:
As the grease is completely water resistant it is best removed with an approved emulsifying skin cleaner.
INGESTION:
Ensure the individual drinks 30ml Milk of Magnesia, preferably in a cup of milk.
EYES:
Irritant but not harmful. Irrigate with water and seek medical attention.
FIRE
FLASH POINT: Above 220°C.
Not classifi ed as fl ammable.
Suitable extinguishing media: CO , Halon or water spray if applied by an experienced operator.
2
10