Installation Instruction - Fulgor Milano FWC 8200 U TC Instrucciones De Instalacion Y Uso

EN

Installation Instruction:

1. Put the wine cooler into the cabinet, then adjust the wine cooler to make it steady. Open the door, take out the fixed
plate , 2pcs Inner Hexagon Screws ,and Inner Hexagon Screwdriver from accessory bag , then use the inner hexagon
screwdriver to tighten the fixed plate on the lower left side of wine cooler.
2. Take out 3pcs Phillips screws from accessory bag , use Phillips screwdriver to tighten the fixed plate on the lower left side
of wine cooler(1pcs screw) , then tighten the other 2pcs Phillips screws on the upper door hinge and lower door hinge.
6