Operating The Device Safely - Dometic MYFRIDGE MF 6W Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MF6W
The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
Never pull the plug out of the socket by the cable.
Disconnect the cooler and other power consuming devices from the
battery before connecting the quick charging device.
Disconnect the cooler or switch it off when you turn off the engine.
Otherwise you may discharge the battery.
2.2

Operating the device safely

!
WARNING!
Do not touch exposed cables with your bare hands.
!
CAUTION!
Before starting the device, ensure that the power supply line and the
plug are dry.
A
NOTICE!
Do not use electrical devices inside the cooler unless they are recom-
mended by the manufacturer for the purpose.
Do not place the device near open flames or other heat sources (heat-
ers, direct sunlight, gas ovens etc.).
Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat that
arises during operation does not build up. Make sure that the device
is sufficiently far away from walls and other objects so that the air can
circulate.
Ensure that the ventilation slots are not covered.
Do not fill the inner container with ice or fluid.
Never immerse the device in water.
Protect the device and the cable against heat and moisture.
EN
Safety instructions
5

Publicidad

Tabla de contenido
loading

Tabla de contenido