American Standard COLONY PRO 7074.400 Instrucciones De Instalación

COLONY PRO
®
DUAL CONTROL BAR FAUCET
Thank you for selecting American Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
RECOMMENDED TOOLS
Adjustable Wrench
1
INSTALL FAUCET
Turn off hot and cold water
CAUTION
supplies before beginning.
• Install FAUCET (1) on lavatory. (No sealant
is required unless mounting deck on lavatory
is uneven).
1
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2016
INSTALLATION
INSTRUCTIONS
Channel Locks
2
SECURE FAUCET AND MAKE WATER
SUPPLY CONNECTIONS
• NOTE: Flexible supplies have to be purchased
separately.
• Secure FAUCET (1) with ATTACHMENT NUTS (2)
supplied. (HAND TIGHTEN).
• Connect water supply to FAUCET (1) with 1/2" IPS
FLEXIBLE SUPPLIES (3) or 3/8" O.D. BULL-NOSE
RISERS (4). Use adjustable wrench to tighten
connections. Do not over tighten. Be careful not to
kink copper supply when bending. Use tubing cutter
to cut to proper length.
- 1 -
7074.400
Certified to comply with ANSI A112.18.1M
Plumbers' Putty
or Caulking
(HAND TIGHTEN)
2
3
4
Phillips Screwdriver
1
COUPLING NUT
FERRULE
M965763 (9/16)