Sauder 426908 Instrucciones De Montaje página 24

Step 18
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D550 and D551).
å
Fasten the EXTENSION SLIDES (35MC) to the DRAWER SIDES (D550 and D551). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Repeat this step for the remaining drawer.
Open end
1
2
3
Page 24
10A
D551
Drawer Slide
Center the screw in the oval hole.
426908
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D550
2
3
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
www.sauder.com/service
7
Open end
1
3S