Descargar
Compartir
Imprimir esta página
Sauder 426509 Instrucciones De Montaje
  1. Manuales
  2. Marcas
  3. Sauder Manuales
  4. Muebles de Interior
  5. 426509
  6. Instrucciones de montaje
Sauder 426509 Instrucciones De Montaje

Sauder 426509 Instrucciones De Montaje

Ocultar thumbs

Publicidad

Enlaces rápidos

Descargar este manual
CONTACT US FIRST
CONTACT US FIRST
sauder.com
sauder.com
sauder.com
BEFORE MAKING ANY RETURNS TO THE STORE.
BEFORE MAKING ANY RETURNS TO THE RETAILER.
sauder.com/service
Visit
Prefer the phone? Give us a ring at
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
L-Desk
Harvey Park Collection | Model 426509
Sauder.com
Share your journey!
to order replacement parts, view video assembly tips, or chat with a live rep.
1-800-523-3987
.
For all your
newfangled gadgetry.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-28
Français pg 29-32
Español pg 33-36
Lot # 541785
03/09/20
Purchased: __________________

Publicidad

loading

Manuales relacionados para Sauder 426509

Resumen de contenidos para Sauder 426509

  • Página 1 Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays) For all your newfangled gadgetry. L-Desk NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Harvey Park Collection | Model 426509 PLEASE READ AND KEEP FOR FUTURE REFERENCE. Sauder.com English pg 1-28 Français pg 29-32 Español pg 33-36...
  • Página 2 Table of Contents Assembly Tools Required Part Identification No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identification Assembly Steps 5-28 Hammer Français 29-32 Not actual size Español 33-36 Safety 37-38 Warranty Page 2 426509 www.sauder.com/service...

  • Página 3: Part Identification

    SHORT MODESTY PANEL (1) RIGHT CORNER BACK (1) LONG TOP (1) RIGHT DRAWER SIDE (1) ADJUSTABLE SHELF (1) SHORT TOP (1) LEFT DRAWER SIDE (1) FIXED SHELF (1) UPRIGHT (1) DRAWER BACK (1) SKIRT (1) D716 www.sauder.com/service 426509 Page 3...
  • Página 4 BLACK 9/16" LARGE HEAD SCREW - 16 3S GOLD 5/16" FLAT HEAD SCREW - 4 30S BLACK 1-9/16" FLAT HEAD SCREW - 4 113S BLACK 1-15/16" FLAT HEAD SCREW - 10 128S SILVER 1/2" FLAT HEAD SCREW - 4 Page 4 426509 www.sauder.com/service...
  • Página 5 Not technically faster. å To begin assembly, push two SAUDER TWIST-LOCK® But definitely makes for a sturdier FASTENERS (10F) into the large holes in the RIGHT END (A). L-Desk that’ s easier to assemble and friendlier to the environment.
  • Página 6 NOTE: The EXTENSION SLIDES (35MC) will be used later for the DRAWER. 35MC 35MA Push the black lever in and pull the SLIDE from the RAIL. 128S SILVER 1/2" FLAT HEAD SCREW (2 used for the RAIL) Edge with TWIST-LOCK® FASTENERS Open end Page 6 426509 www.sauder.com/service...
  • Página 7 Step 3 å Push two SAUDER TWIST-LOCK® FASTENERS (10F) into the large holes in the BACK (M). Some assembly å Insert one WOOD DOWEL (15F) into the RIGHT END (A). (and snacks) required. å Fasten the BACK (M) to the RIGHT END (A). Tighten one TWIST-LOCK®...
  • Página 8 Step 4 å Push four SAUDER TWIST-LOCK® FASTENERS (10F) into the large holes in the FIXED SHELF (J). å Fasten the FIXED SHELF (J) to the RIGHT END (A). Tighten two TWIST-LOCK® FASTENERS. Finished edge i t h ® f a c...
  • Página 9 Unfinished edge and into the hole in the RIGHT END. å NOTE: Be sure the WOOD DOWEL in the RIGHT END inserts into the DUST RAIL (L). BLACK 9/16" LARGE HEAD SCREW (5 used in this step) www.sauder.com/service 426509 Page 9...
  • Página 10 Step 6 å Push two SAUDER TWIST-LOCK® FASTENERS (10F) into the large holes in the UPRIGHT (Q). å Fasten one EXTENSION RAIL (35MA) to the UPRIGHT (Q). Use two SILVER 1/2" FLAT HEAD SCREWS (128S) through holes #1 and #3.
  • Página 11 Fasten the UPRIGHT (Q) to the SKIRT (K). Use one BLACK 9/16" LARGE HEAD SCREWS (1S) through the METAL BRACKET on the SKIRT and into the hole in the UPRIGHT. BLACK 9/16" LARGE HEAD SCREW (1 used for the BRACKET) www.sauder.com/service 426509 Page 11...
  • Página 12 Step 8 å Insert five SAUDER TWIST-LOCK® FASTENERS (10F) into the large holes in the SHORT MODESTY PANEL (D) and LONG SHELF (E). Do not tighten the TWIST-LOCK® FASTENERS in this step. Page 12 426509 www.sauder.com/service...
  • Página 13 113S BLACK 1-15/16" FLAT HEAD SCREW (2 used in this step) i t h ® f a c S u r - L O I S T E R S T E N F A S www.sauder.com/service 426509 Page 13...
  • Página 14 Step 10 å Fasten the SHORT MODESTY PANEL (D) and LONG SHELF (E) to the UPRIGHT (Q). Tighten three TWIST-LOCK® FASTENERS. Page 14 426509 www.sauder.com/service...
  • Página 15 Step 11 å Insert one SAUDER TWIST-LOCK® FASTENER (10F) into the large hole in the RIGHT CORNER BACK (G). å Insert one WOOD DOWEL (15F) into the LONG SHELF (E). å Fasten the RIGHT CORNER BACK (G) to the SHORT MODESTY PANEL (D) and LONG SHELF (E). Use three BLACK 1-15/16"...
  • Página 16 Step 12 å Insert eight SAUDER TWIST-LOCK® FASTENERS (10F) into the large holes in the LEFT END (B) and LONG MODESTY PANEL (C). Do not tighten the TWIST-LOCK® FASTENERS in this step. Part (B). Another sturdier, easier, friendlier component! Page 16 426509 www.sauder.com/service...
  • Página 17 PANEL (C). Tighten two TWIST-LOCK® FASTENERS. i t h ® f a c S u r - L O I S T E R S T E N F A S For support, place packing foam and magazines here. www.sauder.com/service 426509 Page 17...
  • Página 18 Step 14 å Insert one SAUDER TWIST-LOCK® FASTENER (10F) into the large hole in the LEFT CORNER BACK (F). å Fasten the LEFT CORNER BACK (F) to the LONG MODESTY PANEL (C). Use two BLACK 1-15/16" FLAT HEAD SCREWS (113S).
  • Página 19 CORNER BACK (G). Use three BLACK 1-15/16" FLAT HEAD SCREWS (113). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 113S BLACK 1-15/16" FLAT HEAD SCREW (3 used in this step) www.sauder.com/service 426509 Page 19...
  • Página 20 SCREW head in the SHORT MODESTY PANEL (D) and CORNER BACKS (F and G). å Insert the GROMMETS (7P) and GROMMET CAPS (8P) into the large holes in the CORNER BACKS (F and G). To cover screws (10 used) Page 20 426509 www.sauder.com/service...
  • Página 21 Fasten two PLATES (41G) to the SHORT TOP (P). Use four BLACK 9/16" LARGE HEAD SCREWS (1S). å Insert four WOOD DOWELS (15F) into the SHORT TOP (P). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) Part (P). Another sturdier, easier, friendlier component! www.sauder.com/service 426509 Page 21...
  • Página 22 Fasten the SHORT TOP (P) to the RIGHT END (A), SHORT MODESTY PANEL (D), and UPRIGHT (Q). Tighten five TWIST-LOCK® FASTENERS. å NOTE: Be sure the WOOD DOWELS in the TOP insert into the RIGHT END and UPRIGHT. Page 22 426509 www.sauder.com/service...
  • Página 23 Fasten the LONG TOP (O) to the PLATES on the SHORT TOP (P). Use four BLACK 9/16" LARGE HEAD SCREWS (1S). Part (O). Another sturdier, easier, friendlier component! BLACK 9/16" LARGE HEAD SCREW (4 used in this step) www.sauder.com/service 426509 Page 23...
  • Página 24 Fasten the DRAWER BACK (D78) to the DRAWER SIDES (D14 and D15). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S). å NOTE: Be sure the DRAWER BOTTOM (D716) inserts into the groove of the DRAWER BACK (D78). Page 24 426509 www.sauder.com/service...
  • Página 25 SLIDES with holes in DRAWER SIDES Open end 189K BLACK 9/16" LARGE HEAD SCREW (2 used for the PULL) Drawer Slide GOLD 5/16" FLAT HEAD SCREW (4 used for the SLIDES) Center the screw in the oval hole. www.sauder.com/service 426509 Page 25...
  • Página 26 Slide another FILE GLIDE (4B) onto the other end of the FILE RODS (8B), then press this FILE GLIDE over the LEFT DRAWER SIDE (D15). Insert the FILE RODS into the holes in the FILE GLIDES depending on your file sizes. Page 26 426509 www.sauder.com/service...
  • Página 27 The drawer will push in hard until it is all the way in, then it will slide in and out easier. (4 used) 35 lbs. www.sauder.com/service 426509 Page 27...
  • Página 28 å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or Loosen screw #3 a 1/4 turn, turn the cam a 1/4 turn maximum in both the clockwise and counter-clockwise directions to make adjustments, and then tighten screw #3.

  • Página 29: Liste De Pièces

    Modèle 426509 Bureau en L Utilisez les instructions d’ a ssemblage en français avec les NOUS CONTACTER EN PREMIER schémas étape par étape du manuel d’instruction en anglais. AVANT D'EFFECTUER TOUT RETOUR AU MAGASIN. Chaque étape en français correspond à la même étape en Nous faisons de notre mieux pour nous assurer que votre meuble anglais.
  • Página 30 Pour commencer l'assemblage, enfoncer deux FIXATIONS VIS TÊTE LARGE 14 mm NOIRE (1S) à travers la CONSOLE EN TWIST-LOCK® SAUDER (10F) dans les gros trous de MÉTAL sur la PLINTHE et dans le trou de l'EXTRÉMITÉ DROITE. l'EXTRÉMITÉ DROITE (A).
  • Página 31 Ne pas serrer la FIXATION TWIST-LOCK® à cette étape. Ne pas serrer les FIXATIONS TWIST-LOCK® à cette étape. Insérer une FIXATION TWIST-LOCK® SAUDER (10F) dans le gros Enfoncer cinq FIXATIONS TWIST-LOCK® SAUDER (10F) trou de l’ARRIÈRE DE COIN GAUCHE (F).
  • Página 32 REMARQUE : La tête de vis dans l'EXCENTRIQUE doit être visible à travers le trou fendu dans la COULISSE. Fixer la POIGNÉE (189K) au DEVANT DE TIROIR (N). Utiliser deux VIS TÊTE LARGE 14 mm NOIRES (1S). Page 32 426509 www.sauder.com/service...

  • Página 33: Lista De Partes

    (JUEGO DE EXTENSIÓN SE MUESTRA POR SEPARADO) su referencia futura. Si necesita ponerse en EXTREMO IZQUIERDO ..........1 35MA RIEL DE EXTENSIÓN ..........2 contacto con Sauder en VELO DE FONDO LARGO ........1 35MC CORREDERA DE EXTENSIÓN ......2 cuanto a esta unidad, VELO DE FONDO CORTO ........1 10A EXCÉNTRICO DE CORREDERA .......2...
  • Página 34 EXTREMO DERECHO (A). Para comenzar el ensamblaje, empuje dos SUJETADORES Fije el FALDÓN (K) al EXTREMO DERECHO (A). Utilice un TWIST-LOCK® SAUDER (10F) en los agujeros grandes del TORNILLO NEGRO DE CABEZA GRANDE de 14 mm (1S) a través EXTREMO DERECHO (A).
  • Página 35 No apriete los SUJETADORES TWIST-LOCK® en este paso. DEL POLVO (L) y el DORSO (M). Inserte ocho SUJETADORES TWIST-LOCK® SAUDER (10F) en los Fije el PARAL (Q) al ESTANTE INMÓVIL (J) y al DORSO (M). agujeros grandes del EXTREMO IZQUIERDO (B) y del VELO DE Apriete tres SUJETADORES TWIST-LOCK®.
  • Página 36 NOTA: La cabeza de tornillo del EXCÉNTRICO debe ser visible a través del agujero alargado de la CORREDERA. Fije el TIRADOR (189K) a la CARA DE CAJÓN (N). Utilice dos TORNILLOS NEGROS DE CABEZA GRANDE de 14 mm (1S). Page 36 426509 www.sauder.com/service...
  • Página 37 à Les téléviseurs peuvent être particulièrement un téléviseur. cet effet. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. www.sauder.com/service 426509 Page 37...
  • Página 38 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 38 426509 www.sauder.com/service...

  • Página 39: Garantie Limitée De 5 Ans

    à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Página 40 BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.