Front side
3. Align the filter tabs with mating notches and push to snap
the filters into the ADB shroud.
Front side
OPERATION
Ducted Systems
Normal Ducted Use
To distribute air through a ducted system, close the air shutter
by pushing the tab right to pressurize the duct work.
Max Cool
To remove significant heat, open the air shutter to "dump" cool
air directly below the AC. This will eliminate air and heat loss in
the ducted system, and maximize cooling performance. Once
comfortable, close shutter to distribute evenly with the ducted
system. Open and close the shutter by pushing the tab left and
right.
CCD-0005730 Rev: 04-25-22
4. Install the screw caps to cover the screw holes.
Your new rooftop air conditioner has now been fully installed in
the RV roof.
Non-Ducted System
Open shutter to release air.
Thermostat Use
Based on the wall thermostat version you selected. Please
refer to the separate instruction manual on how to operate your
RV air conditioning system.
- 11 -
Screw Cap