Operating Procedure; Tape Recording - Teac A-R600 Manual Del Usuario

OPERATIONS

Operating Procedure

Source
Component
1. Press the POWER button to ON.
2. Select the desired source with the INPUT SELECTOR.
3. Select the speaker system to be used with the
SPEAKERS select buttons.
4. Start playing the source component.
5. Gradually turn up the volume to the required level
with the VOLUME control.
6. Adjust the balance between the left and right
channels with the BALANCE control.
7. Adjust the tone as required with the BASS and
TREBLE tone controls.

Tape Recording

Source
Component
1. Press the POWER button to ON.
2. Press the INPUT SELECTOR corresponding to the
source to be recorded.
3. Start playing back the program source to be
recorded.
4. Operate the tape deck for recording.
_ 7 _
Recording
Tape Deck